AWS E308LT1-1/4 Flux-Cored Wire
Specification:
AWS Classification: E308LT1-1/4
Type: Flux-Cored Wire
Shielding Gas: 100% CO2 or 75% Ar / 25% CO2
Diameter Range: 0.035" - 0.045" (0.9mm - 1.2mm)
Applications:
Suitable for welding of austenitic stainless steels, such as 18Cr-8Ni (Type 304) and similar grades.
Ideal for applications requiring excellent corrosion resistance and high-temperature strength.
Uses:
Automotive and aerospace industries
Food processing equipment
Chemical processing equipment
Pharmaceutical equipment
Structural components
Chemical Composition (wt%):
| Element | Carbon (C) | Manganese (Mn) | Silicon (Si) | Phosphorus (P) | Sulfur (S) | Chromium (Cr) | Nickel (Ni) | Iron (Fe) |
|---|---|---|---|---|---|---|---|---|
| Composition | 0.08% max | 1.00 - 2.50% | 0.30 - 0.65% | 0.03% max | 0.03% max | 18.00 - 21.00% | 9.00 - 11.00% | Balance |
Mechanical Properties:
Tensile Strength (min): 75,000 psi (515 MPa)
Yield Strength (min): 60,000 psi (415 MPa)
Elongation (min): 30%
Charpy V-Notch Impact Properties: -20°C (-4°F), 40 J (30 ft·lbf)
Other Details:
Suitable for both single-pass and multipass welding.
Provides good slag detachability, ensuring clean welds.
Stable arc characteristics for consistent and reliable welds.
Low spatter and fume generation for improved workplace safety.
Recommended storage conditions: Store in a dry environment at temperatures between 50°F - 100°F (10°C - 38°C).
Safety Precautions:
Always follow proper welding procedures and safety guidelines.
Use appropriate personal protective equipment (PPE) such as gloves, eye protection, and respiratory protection.
Ensure proper ventilation in the welding area to minimize exposure to fumes and gases.
BRANDS AVAILABLE IN AWS E308LT1-1/4 Flux-Cored Wire
ESAB, Bohler, Taseto, Kiswel, Daiko Hankook, Corodur
**Disclaimer:The information provided on this website is for general informational purposes only. While we strive for accuracy, we make no warranties or representations regarding the completeness or suitability of the information, and any reliance you place on it is at your own risk. We operate as independent traders and distributors. All third-party trademarks (including logos, product names, and icons) referenced are the property of their respective owners and are used strictly for identification and reference purposes. Such references do not imply any sponsorship, endorsement, or official affiliation. We disclaim all liability for any damages arising from the use or misuse of the information provided.