Product Datasheet for ERNiCrMo-13 MIG Wire, TIG Rods, & SAW Wires (Alloys 59)

Product Overview:

ERNiCrMo-13 is a nickel-chromium-molybdenum alloy known for its excellent resistance to a wide range of severe corrosive environments and high temperatures. This alloy is particularly effective for welding materials of similar composition and is widely used in industries where resistance to oxidizing and reducing conditions is critical.

Specifications :

• AWS Classification: A5.14 ERNiCrMo-13
• UNS Number: N06045
• ISO - EN ISO 18274 S Ni6059

Available in:

• MIG Wire Form: Suitable for automated or semi-automated welding processes.
• TIG Wire Form: Ideal for precise, high-quality welds with manual welding processes.
• SAW (Submerged Arc Welding)

STRIP CLADDING – (NiCrMo-13 (N06059 - Alloy 59)

• AWS Classification : A5.11 EQNiCrMo-13 / SFA 5.14, EQNiCrMo-13
• Other Standard :18274, B Ni 6455 (NiCr16Mo16Ti)
• Available Sizes : Custom sizes available upon request

Chemical Composition (%):

Element	Min	Max
Nickel (Ni)	55.0	63.0
Chromium (Cr)	20.0	23.0
Molybdenum (Mo)	15.0	17.0
Iron (Fe)	4.0	7.0
Tungsten (W)	3.0	4.5
Cobalt (Co)	-	2.5
Manganese (Mn)	-	1.0
Vanadium (V)	-	0.35
Carbon (C)	-	0.02
Silicon (Si)	-	0.08
Phosphorus (P)	-	0.03
Sulfur (S)	-	0.02

Mechanical Properties

Property	Typical Value
Tensile Strength	750 MPa (109 ksi)
Yield Strength	320 MPa (46 ksi)
Elongation (in 50mm)	35%
Hardness (Brinell)	220-240 HB

Applications :

ERNiCrMo-13 is extensively used in industries requiring high resistance to aggressive corrosive environments and elevated temperatures. Typical applications include:

• Chemical processing equipment

• Petrochemical facilities

• Marine and offshore engineering

• Pollution control systems

• Power generation (particularly in boilers and heat exchangers)

Storage and Handling

• Store in a dry, enclosed environment to prevent moisture and contamination.
• Maintain temperature-controlled storage to prevent condensation.
• Handle with clean gloves to avoid contamination with oils and dirt.
• Use desiccant bags in packaging to absorb any residual moisture.

Manufacturers/Brands and their Product/Trade Name:

Brand	Product Name (MIG-TIG-SAW)	Product Name (STRIP)
BOHLER	Thermanit NiMo C 24	SOUDOTAPE NiCrMo59 with RECORD EST 259 flux
UTP	UTP A 759
ESAB	Exaton NiCrMo-13 / OK Autrod NiCrMo-13
Daiko	DAIKO SF 59	DAIKOSTRIP 59
Lincoln	HAS® 59
Selectarc	SELECTARC NI59
VDM		VDM® Alloy 59

**Disclaimer:

The information provided on this website is for general informational purposes only. While we strive for accuracy, we make no warranties or representations regarding the completeness or suitability of the information, and any reliance you place on it is at your own risk. We operate as independent traders and distributors. All third-party trademarks (including logos, product names, and icons) referenced are the property of their respective owners and are used strictly for identification and reference purposes. Such references do not imply any sponsorship, endorsement, or official affiliation. We disclaim all liability for any damages arising from the use or misuse of the information provided.