Chemical Compositions
| Element | ENi-1 Welding Electrodes (%) |
|---|---|
| Nickel (Ni) | 95.0 - 98.0 |
| Chromium (Cr) | 1.0 max |
| Iron (Fe) | 0.75 max |
| Carbon (C) | 0.10 max |
| Manganese (Mn) | 0.50 max |
| Silicon (Si) | 0.30 max |
| Sulfur (S) | 0.015 max |
| Phosphorus (P) | 0.030 max |
Mechanical Properties
| Property | Value |
|---|---|
| Tensile Strength | ≥ 75,000 psi (520 MPa) |
| Yield Strength | ≥ 40,000 psi (275 MPa) |
| Elongation | ≥ 25% |
| Impact Toughness (Charpy V-notch) | ≥ 27 ft-lb (37 J) at -20°F (-29°C) |
BRANDS AVAILABLE IN AWS ENi-1:
ESAB, Bohler, UTP, Special metals, Daiko, Selectarc, Ador, D&H**Disclaimer:
The information provided on this website is for general informational purposes only. While we strive for accuracy, we make no warranties or representations regarding the completeness or suitability of the information, and any reliance you place on it is at your own risk. We operate as independent traders and distributors. All third-party trademarks (including logos, product names, and icons) referenced are the property of their respective owners and are used strictly for identification and reference purposes. Such references do not imply any sponsorship, endorsement, or official affiliation. We disclaim all liability for any damages arising from the use or misuse of the information provided.